After-filter unit, ICM multicyclone
Final filters are required to operate a cyclone system. They provide the necessary suction capacity and must be matched to the pressure loss in the overall system.
Showing 1–16 of 23 results
ColorSelect X
The new WAGNER ColorSelect X is designed for the quickest powder color change while providing the least potential for cross contamination and powder loss.
WAGNER ColorSelect X incorporates a simple, robust pneumatic control system of up to 10 powder feed systems including hopper utilizing air, powder injector feed air, and dosage air. The operator control panel includes the WAGNER ColorSelect X dial and quick connect ports for 10 colors.
Corona automatic guns
For automatic powder coating
Increased transfer efficiency rate – The optimized e-static technology ensures an efficient powder charging.
Smooth powder output – The gun and nozzle design of the PEA C4 gun guarantees stable coating results.
Flexible application options – A wide range of powders can be applied, including metallic or UDS powder.
Cup gun case set
This set is a ready to use coating device. With air pressure and powder supply the device is ready to start powder coating. An ideal solution for small parts and mobile use with excellent coating results.
Cup-gun PEM-X1 CG
The simple handling and perfect ergonomics of WAGNER cup guns make them ideal for lab and development purposes and for powder coating individual items and very small quantities.
Final filter unit monocyclones
Final filters are required to operate a cyclone system. They provide the necessary suction capacity and must be matched to the pressure loss in the overall system.
High-voltage tester
High-voltage tester for measuring high voltage, for example of a gun.
ICF filter recovery
ICF system
The filter is used to separate coating powders directly. It is characterized by a very high separation efficiency of over 99.9%. The ICF system can be flange-mounted directly onto the booth. The mobile filter trolley can be readily exchanged during a paint change.
ICF filter recovery – air outlet box
The sound-insulated air outlet box collects the air that is sucked in and blown out by the fans and returns it to the environment.
ICF filter recovery – fan box
The fan box allows for a certain suction capacity of a booth. If the pressure loss in the air system is known, the expected air power can be calculated on the basis of the fan characteristic curves. It is optimally coordinated with the ICF system.
ICF Recovery System – Filter trolley
The powder/air mixture sucked in from the booth is separated in the filter trolley. The powder is captured in the ribs and is cleaned off by compressed air impulses. The recovered powder may thus be returned to circulation.
Manual system Sprint 60 l
The Sprint 60L is used to fluidize the powder in a 60 liter stainless steel tank. All coating parameters are set and saved using the control unit EPG-Sprint X . In combination with the PEM-X 1, perfect surfaces are achieved.
Manual system Sprint Airfluid
Using the Sprint AirFluid allows you to work directly out of the carton. Ideal for small batches and frequent paint changes. All parameters are set and saved via the EPG-Sprint X. In combination with the PEM-X 1, perfect surfaces are achieved.
Metallic nozzles C4 F5 & X1 F5
For the use of effect & metallic powder coatings
The new F5 metallic nozzles for manual and automatic guns enable a significant quality increase in the use of difficult effect & metallic powder coatings.
The new nozzles were specially developed for the WAGNER PEM-X1 manual gun and the PEA-C4 automatic gun. Their special internal geometry prevents powder deposits on the inside of the nozzle when using highly pigmented metallic paints in a wide variety of areas, such as metal furniture, household appliances, motorcycles or in the automotive industry.
Monocyclone
Powder recovery system
The monocyclone is used with automatic booths in paint change systems. It separates the powder/air mixture sucked out of the booth. The exhaust passes to the final filters via a pipe. The sieved powder is returned to the guns.
Multicyclone
Powder recovery system
Multicyclone units are used as a powder recovery system in WAGNER IC stainless steel booths. They are characterized by their compact design and high separation efficiency.