AG 14

Airless manual gun

Airless manual gun for up to 270 bar for Airless finishing applications. With filter and swivel joint. Various nozzle attachments.

AquaCoat 5010 Automatic

Slim cabinet for the electrostatic processing of water-based lacquers with max. two automatic guns. Completely insulated construction with internal charging of the materials for manual spraying applications, Airspray and AirCoat. Suitable for low pressure guns (GA 2800EAW & WA 900) or high pressure guns (GA 4000).

AquaCoat 5010 Manual

Slim cabinet for the electrostatic processing of water-based lacquers and separating agent with manual guns. Completely insulated construction with internal charging of the materials for manual spraying applications, AirSpray and AirCoat. Basic spray sets including cabinet & control unit, pump set, and guns available, can also be customized.

AquaCoat 5020 Automatic

Large cabinet for the electrostatic processing of water-based lacquers with max. two automatic guns. Completely insulated construction with internal charging of the materials for manual spraying applications, AirSpray and AirCoat. Suitable for low pressure guns (GA2800EAW & WA900) or high pressure guns (GA 4000).

AquaCoat 5020 Manual

Large cabinet for the electrostatic processing of water-based lacquers and separating agent with manual guns. Completely insulated construction with internal charging of the materials for manual spraying applications, AirSpray and AirCoat. Basic spray sets including cabinet & control unit, pump set, and guns available, can also be customized.

Automatic electrostatic gun GA 5000 EA

Low-pressure gun for water-based paint

With the automatic electrostatic gun GA 5000 EA, up to 50% material and 20% coating time can be saved. Furthermore it also offers wide-ranging opportunities in terms of ideal application control in combination with the control unit EPG 5000.

  • High application efficiency through soft spray jet
  • High coating quality through fine atomization
  • Even curves and inaccessible locations can be coated with high quality
  • Short maintenance times thanks to easy assembly & disassembly
  • Manual or automatic control via external interface

Automatic electrostatic gun GA 5000 EAC

Low-pressure gun for water-based paint

With the automatic electrostatic gun GA 5000 EAC, up to 50% material and 20% coating time can be saved. Furthermore it also offers wide-ranging opportunities in terms of ideal application control in combination with the control unit EPG 5000.

  • High application efficiency through soft spray jet
  • High coating quality through fine atomization
  • Even curves and inaccessible locations can be coated with high quality
  • Short maintenance times thanks to easy assembly & disassembly
  • Manual or automatic control via external interface

Automatic electrostatic gun GA 5000 EACW

Low-pressure gun for water-based paint

With the automatic electrostatic gun GA 5000 EACW, up to 50% material and 20% coating time can be saved. Furthermore it also offers wide-ranging opportunities in terms of ideal application control in combination with the control unit VM 5020 WA of the AquaCoat system.

  • High application efficiency through soft spray jet
  • High coating quality through fine atomization
  • Even curves and inaccessible locations can be coated with high quality
  • Short maintenance times thanks to easy assembly & disassembly
  • Manual or automatic control via external interface

Automatic electrostatic gun GA 5000 EAW

Low-pressure gun for water-based paint

With the automatic electrostatic gun GA 5000 EAW, up to 50% material and 20% coating time can be saved. Furthermore it also offers wide-ranging opportunities in terms of ideal application control in combination with the control unit VM 5020 WA of the AquaCoat system.

  • High application efficiency through soft spray jet
  • High coating quality through fine atomization
  • Even curves and inaccessible locations can be coated with high quality
  • Short maintenance times thanks to easy assembly & disassembly
  • Manual or automatic control via external interface

Evobell 3500

Electrostatic high rotation atomizer

With the Evobell 3500, WAGNER has developed a new generation of high-speed rotary atomizers that set new standards in the areas of surface finish, lacquer saving, reliability, safety and ease of servicing. The atomizer bell, broken down into bell and distributor, guarantees quick inexpensive adaptation to the product being atomized. Only the distributor needs to be changed! The unique design of the distributor allows optimal cleaning and flushing of the atomizer bell and distributor.

  • High efficiency
  • Exellent surface quality
  • High Flexibility
  • High Performance
  • Serviceability

GA 1900

Automatic airspray gun for brilliant surfaces

The WAGNER GA 1900 was specially developed for applications in continuous operation where particularly high-quality surfaces are required. The certified stainless steel air caps are manufactured with high precision and guarantee repeatable coating results of the best quality. The gun is therefore particularly suitable for coating a wide variety of components in the automotive industry.

  • Highest precision and reproducible spray pattern
  • Significant material savings thanks to an application efficiency of up to 85%
  • Long service life of the gun due to the use of high-quality materials

GA 1900

Automatic airspray gun for brilliant surfaces

The WAGNER GA 1900 was specially developed for applications in continuous operation where particularly high-quality surfaces are required. The certified stainless steel air caps are manufactured with high precision and guarantee repeatable coating results of the best quality. The gun is therefore particularly suitable for coating a wide variety of components in the automotive industry.

  • Highest precision and reproducible spray pattern
  • Significant material savings thanks to an application efficiency of up to 85%
  • Long service life of the gun due to the use of high-quality materials

GA 250AL

Airless manual gun

Airless automatic gun for product pressures up to 250 bar.

GA 4000ACEC

AirCoat automatic gun

AirCoat automatic guns with external controller for the installation in automated lacquer spraying systems. Various base plates allow numerous installation options. With or without circulation.

 

GA 4000ACIC

AirCoat automatic gun

AirCoat automatic guns with internal controller for the installation in automated lacquer spraying systems. Various base plates allow numerous installation options. With or without circulation.

 

GA 400AL

Airless manual gun

Airless automatic gun for product pressures up to 400 bar.

GM 4100AC

AirCoat manual gun

Light AirCoat manual gun with excellent ergonomics for smaller hands. With various nozzles and air caps for low-viscosity and highest-viscosity products.

 

GM 4700AC

AirCoat manual gun

Light AirCoat manual gun with excellent ergonomics for larger hands. With various nozzles and air caps for materials with low-viscosity and highest-viscosity.

 

GM 4700AC-H

AirCoat manual gun

Light AirCoat manual guns with insulation for processing heated materials. The gun is designed for a product pressure of up to 350 bar.

 

GM 5000EA

Electrostatic manual gun Airspray for solvent-based lacquers

Electrostatic manual gun for AirSpray applications with low-conductive solvent-based lacquers. With integrated high-voltage cascade. Additionally required: Control unit VM500 or VM 5000.

GM 5000EAC

Electrostatic manual gun AirCoat for solvent-based lacquers

Electrostatic manual gun for AirCoat applications with low-conductive solvent-based material. With integrated high-voltage cascade. Additionally required: Control unit VM500 or VM 5000.

GM 5000EACW

Electrostatic manual gun Aircoat for water-based lacquers

Electrostatic manual gun for AirCoat applications with water-based material.

GM 5000EAW

Electrostatic manual gun Airspray for water-based lacquers

Electrostatic manual gun for Airspray applications with water-based material and internal charging.

GM 5020 EACW

Electrostatic manual gun for AirCoat applications with separating agent & water-based lacquers and internal charging with integrated high-voltage cascade.

GM 5020 EAW

Electrostatic manual gun for Airspray applications with separating agent & water-based lacquers and internal charging with integrated high-voltage cascade.

PILOT GA 9010 Marking

The PILOT GA 9010 Marking is a fully automatic spray gun for spot and line marking. It is suitable for alphanumeric labelling.

Sharp-edged markings are possible with the PILOT GA 9010 Marking. Thanks to the extremely short switching times (open, spray, close), it is ideal for use in production processes with short cycle times. Specially designed flushing devices and a robust construction ensure that the PILOT GA 9010 Marking delivers smooth production processes even under the most difficult conditions.

Applications:

  • OK and NOK component marking
  • Alphanumeric labelling 
  • Food processing
  • Adhesive processing with spot-accurate application

PILOT Mini

Medium pressure Airspray manual gun

WALTHER PILOT spray guns can process virtually all coating materials. These not only include water and solvent based lacquers, but alsoadhesives, separating agents, oils and more. All models offer an extensive nozzle selection to meet the highest quality requirements andensure material-saving processes. Additionally, most of the spray guns are also available as medium-pressure and HVLP Plus models. Thisallows for particularly high application rates. Put us to the test and use the successful results as benchmark: The spraying results, the materialsavings, and the sustained contribution to environmental protection thanks to the reduced use of overspray.

  • Quality „Made in Germany“
  • Design Variants- Flexibility
  • Perfect Handling
  • Reliability
  • Options

PILOT Premium

Airspray manual gun

WALTHER PILOT spray guns can process virtually all coating materials. These not only include water and solvent based lacquers, but alsoadhesives, separating agents, oils and more. All models offer an extensive nozzle selection to meet the highest quality requirements andensure material-saving processes. Additionally, most of the spray guns are also available as medium-pressure and HVLP Plus models. Thisallows for particularly high application rates. Put us to the test and use the successful results as benchmark: The spraying results, the materialsavings, and the sustained contribution to environmental protection thanks to the reduced use of overspray.

  • Quality „Made in Germany“
  • Design Variants- Flexibility
  • Perfect Handling
  • Reliability
  • Options

PILOT Trend

Airspray manual gun

WALTHER PILOT spray guns can process virtually all coating materials. These not only include water and solvent based lacquers, but also adhesives, separating agents, oils and more. All models offer an extensive nozzle selection to meet the highest quality requirements and ensure material-saving processes. Additionally, most of the spray guns are also available as medium-pressure and HVLP Plus models. This allows for particularly high application rates. Put us to the test and use the successful results as benchmark: The spraying results, the material savings, and the sustained contribution to environmental protection thanks to the reduced use of overspray.

  • Quality „Made in Germany“
  • Design Variants- Flexibility
  • Perfect Handling
  • Reliability
  • Options

PILOT WA 900

Airspray automatic gun with internal control

For use with quick-change adapter plates.

PROTEC GM1-350

Airless manual gun

Airless manual gun with 2-finger-trigger for corrosion protection and finishing up to 350 bar. With filter, ProfiTip nozzle holder, and rotary fitting. Can also be used with insulating handle for heated product.

  • Excellent spraying for optimum coating results
  • Lightest gun of its class!
  • Compact design combined with perfect ergonomics and low trigger force forfatigue-free working
  • Uncompromising quality for maximum reliable working performance
  • Fast nozzle and filter change guarantees high availability

PROTEC GM1-530

Airless manual gun

Airless manual gun with 4-finger-trigger for heavy corrosion protection up to 530 bar. With filter, ProfiTip nozzle holder, and rotary fitting. Can also be used with insulating handle for heated product.

  • Excellent spraying for optimum coating results
  • Lightest gun of its class!
  • Compact design combined with perfect ergonomics and low trigger force forfatigue-free working
  • Uncompromising quality for maximum reliable working performance
  • Fast nozzle and filter change guarantees high availability

TOPFINISH Bell 1S

High-speed rotation atomiser for reciprocators & linear axes

While the RobotBell can be mounted on a robot arm, the TOPFINISH Bell 1S has been specially designed for use with reciprocators and linear axes. It is ideal for electrostatic applications with water and solvent-based paints and can be applied for automated liquid coating in a wide range of industries where high-quality surfaces are required.

  • Ideal coating results with super-fine atomisation
  • High variability thanks to individual adjustment of the spray jet with two shroud airs – depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated
  • Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel

TOPFINISH GM 1010G CAT-X

Low-pressure gun for water-based paint

The WAGNER TOPFINISH GM 1010G CAT-X with its excellent ergonomics enables high-quality coating results even during long application tasks. Available as gravity-feed cup version, it is highly suitable for coating applications in various market segments, such as wood, metal and transportation.

  • All-position use thanks to the hermetically sealed PPS cup
  • Suitable for all types of material as all wetted parts are made from stainless steel
  • Excellent atomization quality with the 12-point fluid nozzle
  • Fatigue-free operation thanks to the ergonomic design and perfect balance
  • High flexibility due to a wide range of nozzle sizes and air caps

TOPFINISH RobotBell 1

High-speed rotation atomiser for robots

With the high-speed rotation atomiser TOPFINISH RobotBell 1, both small workpieces and large surfaces can be coated with highest efficiency. The RobotBell is ideal for electrostatic applications with water and solvent-based paints. Thanks to its versatility and robust properties, it allows perfect surface coatings in a wide range of areas – such as for workpieces in the automotive, metal, plastic or wood industry.

  • Ideal coating results with super-fine atomisation
  • High variability thanks to individual adjustment of the spray jet with two shroud airs – depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated
  • Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel