Description
- Simple plug-in principle for the cup
- Short and safe paint change times of approximately 15 seconds.
- Funnel beaker with special geometry
- The different slope angles ensure constant flow even with difficult powder types
- Integrated Venturi feeding principle
- Very fine and constantly homogeneous dosage dispensing of the powder quantity
- The coating parameters are set via the control module
- All coating-relevant parameters are saved and accessed via the fully electronic control module
| OUTPUT VOLTAGE | 100,0 kV |
| AIR INLET PRESSURE | 0,3 MPa, 3,0 bar, 44 PSI |
| OPERATING TEMPERATURE | 5 – 45 °C, 41.0 – 113.0 °F |
| WEIGHT | 0,6 kg, 1.2 lb |
